- Designs
- EV Charging
EV Charging
EV-CHARGING Receive alerts
An Electric Vehicle (EV) charging station supplies power for recharging electric vehicles. Typical EV charging stations are made up of at least one smart controller board and one power socket board. The smart controller manages security, services and connectivity to a remote server and the power socket board distributes and measures energy.
Product Details
Block Diagram
Choose a diagram:
Supported Devices
Interfaces
USB PD-PHY and CC-Logic
- PTN5150: CC Logic for USB Type-C Applications
RFID
Connected NFC Tags
- NTAG_I2C: NTAG I²C Plus 2K: NFC Forum Type 2 Tag with I²C Interface
NFC Readers
- PN7160: NFC Plug and Play Controller with Integrated Firmware and NCI Interface
Wireless Connectivity
Sub-1 GHz Wireless Solutions
- OL2385AHN: Low-Power Multi-Channel UHF RF Wireless Platform
Multiprotocol MCUs
- K32W061_41: K32W061/41: High-Performance, Secure and Ultra-Low-Power MCU for Zigbee®,Thread™, and Bluetooth® LE 5.0 with Built-In NFC Option
Wi-Fi® + Bluetooth® + 802.15.4
- IW416: 2.4/5 GHz Dual-Band 1x1 Wi-Fi® 4 (802.11n) + Bluetooth® 5.2 Solution
Analog and Mixed Signal
RTCs with Temperature Compensation
- PCF2131: Nano-Power Highly Accurate RTC with Integrated Quartz Crystal
Bridges
- SC18IM704: UART to I²C-Bus Bridge
Sensors
Magnetic Sensors
- NMH1000: NMH1000 Ultra-Low Power and Low-Voltage Magnetic Switch
I3C/I²C Digital Temp. Sensors
- P3T1755DP: I3C/I2C-Bus ±0.5 °C Accurate Digital Temperature Sensor
Power Management
AC-DC Controllers with Integrated Power Switch
- TEA1723DT: HV Start-up Flyback Controller with Integrated MOSFET for 11 W Applications, F~Burst = 1270 Hz
PMICs
- PCA9451A: PCA9451A Power Management IC for i.MX 93x Application Processor
LED Drivers
- PCA9955BTW: 16-Channel Fm+ I²C-Bus 57 MA/20 V Constant-Current LED Driver
Security and Authentication
Authentication
- SE050: EdgeLock® SE050: Plug and Trust Secure Element Family – Enhanced IoT security with high flexibility
Processors and Microcontrollers
KM Series Arm Cortex-M0+
- KM3x: 50–75 MHz Precision Metrology MCUs with Segment LCDs Based on Arm® Cortex®-M0+
- TWO-PHASE-POWER-METER: Two-Phase Power Meter Reference Design
Features
i.MX 93 Applications Processor
- 1-2x Arm® Cortex®-A55 @ 1.7 GHz
- Arm Cortex-M33 @ 250 Mhz
- Arm® Ethos™ U-65 microNPU
- EdgeLock® secure enclave
- 2x USB 2.0 Type C with PHY
- 2x Gb Ethernet: AVB and IEEE 1588 for sync, and EEE for low power. 1 with TSN
- 2x CAN-FD
- 8x UART/USART/Profibus, 8x I2C, 8x SPI, 2x I3C
- 1x 4-ch, 12-bit ADC
- 2x 32-pin FlexIO interfaces (camera, bus or serial I/O)
i.MX RT1060
- Highest performing Arm Cortex-M7
- 3020 CoreMark/1284 DMIPS @ 600 MHz
- 1 MB On-Chip SRAM - up to 512 KB configurable as Tightly Coupled Memory (TCM)
- Real-time, low-latency response as low as 20 ns
- Industry’s lowest dynamic power with an integrated DC-DC converter
- Low-power run modes at 24 MHz
- Advanced multimedia for GUI and enhanced HMI
KM3x
- High-performance Arm® Cortex®-M0 core, up to 75 MHz of core clock frequency
- 512 KB/256 KB/64 KB single array flash
- Supports v6-M Instruction Set Architecture (ISA) including all 16-bit v7-M instructions plus a number of 32-bit thumb-2 instructions
- PLL to generate clocks for AFE
- FLL to generate core, system and flash clocks
- Flexible modes of operation
- Two internal trim-able clock references
Documentation
Quick reference to our documentation types.
20 documents
-
Data Sheet
CC logic for USB Type-C applications
-
Data Sheet
CC logic for USB Type-C applications
-
Data Sheet
NMH1000 Magnetic Switch Data Sheet
-
Data Sheet
CC logic for USB Type-C applications
-
Data Sheet
Plug & Trust Secure Element
-
Data Sheet
Kinetis KM35 Sub-Family Data Sheet
-
Data Sheet
OL2385, Industrial RF transceiver